Features:

• Pre-selection of the colour temperature of the film used - standard types and intermediate values
• Preset colour temperature characteristics of the film used and pre-selected functions are constantly shown in the display
• Pre-selected functions are constantly displayed
• Readings of the luminous intensity of ambient light in Lux and flash power in Lux/seconds
• A second diffuser for extending the measuring ranges for powerful flash and continuous light is included with each meter

Light for photography is not only defined by its light intensity and luminance, but also by its color composition. The Color-Pro 3F is specifically designed for measuring the photographic color temperature of flash and ambient light, and to indicate the measured results in digress Kelvin (K). However, there is much more to it. After comparing the color temperature measured with the pre-selected color temperature of the film, (in degrees Kelvin), the Color Pro 3F calculates the filter values required to achieve photographs without color casts. The resulting filter values can be expressed as light balancing values in Mired or Kodak Wratten values. In addition, the Color-Pro 3F will indicate in CC filter values the correction required, for example, when working with fluorescent lighting. Three of the most used film color temperatures are programmed into the meter (5500K, 3400K, and 3200K) but these can be freely overridden with color temperatures between 2000 and 9900K.In addition, the Color-Pro 3F measures the intensity of the ambient light in Lux and of Flash light in Lux seconds